So I had a few hours spare last night and decided to do something with the Arduino Nano that's been sat in a box for a while. So together with a bunch of LEDs and the 3D printer here is a mini Flux Capacitor for the C5: Now I just have to figure out how to get a C5 up to 88mph

Hi Dan,

I see that you have two problems.

1. The 88mph shouldn't be too much of a problem, the answer is here.
http://www.c5owners.com/sinclair-c5-forum/topic/555/jet-c5#post4451http://

2. I think this one is a major problem, Where in the hell are you going to obtain a stainless steel body for the C5.

Let me know and I'll join you back in the future.

Nice work dan looks good how you getting the power from the touch board ?

Would look cool on my touch

[quote=Karl;4464]Hi Dan, I see that you have two problems. 1. The 88mph shouldn't be too much of a problem, the answer is here. http://www.c5owners.com/sinclai...-c5.aspx#post4451http:// 2. I think this one is a major problem, Where in the hell are you going to obtain a stainless steel body for the C5. Let me know and I'll join you back in the future. [/quote] LOL Karl, I wouldn't have a clue how to fit something like that anyway Dave: It just needs a 12v supply, I've got it connected straight to the CB. The front light was hacked a bit to make it all fit

You hacked the light

[quote=dave;4469]You hacked the light [/quote] That's right. When you take out the front light housing it comes back quite far. I'll post a picture when I get chance

That's great Dan I want a flux capacitor lol

LOL Karl, I wouldn't have a clue how to fit something like that anyway

Oh common Dan, don't be so modest. You can put your finger to anything.

Seeing that the flux capacitor only works in conjunction with a stainless steel body, I think I've found a solution to this problem, a stainless steel 3D printer.

Who wrote

who can do the best Mod

Get this thing working and you'll not only be voted to have produced the best mod of the winter, but also the best mod of the century.[woot] [woot]

Then you'll really be [h]back[/h] in business

I think the flux could be made to work on a normal c5
I hope lol

I'd like one for the ebike c5

I want one first lol

Hi 51,

it'll work, but not properly, it's gotta be stainless body. There again it will only cut in at 88mph.

I really did this forum, I've just noticed that my submittal is posted six minutes before I write it.

Maybe Dave can tow me upto 88 mph
On his ebike lol

If dave's e-bike is not out of stainless steel you'll leave him behind.

Lol

Lol 28 I've ad out of it

Dave, you are cheating. Your e-bike IS made out of SS, it's fitted with with a flux magnet, AND you reached 88mph.

Otherwise how did you manage to get back into the future? I have the evidence that you've been there.:-" :-"

You have posted a reply to 51's post before he posted it.[woot] [woot]

Here's the evidence.[omg]

[albumimg]192[/albumimg]

So Dave you posted reply #19 four minutes before #18 from 51. Pray tell me how did you manage this without going 'Back to the Future'.[woot] [woot]

Dan, Dave's solved the problem but he's keeping it secret.

He's bought the jet engine and hasn't
Told us

Would love the engine wants 400 for it

400 Jesus
I think Karl has bought it lol

Don't think I'd go in a c5 strapped to it one speed bump hello moon

I don't think I would either so it's over to Karl lol
Maybe he can spot MH370 when he's up there