Here I hope is a solution to the problem of broken indicator clips. Thanks to Chas for sending me some indicators to create the design from:



Here is one of my indicators with the clips missing. I had to file the area where the old clips had broken off so the area was smooth ready for the new clips:



Here are the clips printed out and fitted. They slot into the 2 curved holes either side of the old clips. I have Glued these in position. They won't be coming out or snapping again any time soon[biggrin] :



Back on the C5 and ready to go[laugh] :



I'll get your indicators posted back to you Chas and send you some clips for you to have a test.

Good work dan

Cheers Dan, another problem solved

That's great work Dan

Hi there dan they look great well done
And thanks for posting indicators back can't wait to see the mod thanks Chas

Dan do these just clip to the body ? Or do you need the clip at the back

[quote=dave;4713]Dan do these just clip to the body ? Or do you need the clip at the back [/quote] Hi Dave, The indicator clips to the c5 body as normal. These replacement clips fit in the 2 curved holes either side of the old clips.

So you need the metal clip springs aswell

Hi Dave I am searching for some metal clips that will fit the indicators ..Will post the results when I find some ...
Chas

[quote=dave;4717]So you need the metal clip springs aswell [/quote] LOL, no idea what they are. My indicators just clip into the White plastic body, never had any metal clips or springs You must be one of the lucky ones with a complete indicator kit These replacement clips might not work then with these metal clips/springs you speak of.

Hi Dan

Here is one of the back clips



Chas

That's the clips chas lol

Chas can you get the spring clips of eBay mate ?

Hi I can get clips off ebay but not the same type but I will keep looking
Bye chas

Hi Dan received the clips today thanks they look great and fit well just glued them in place .
Check the photos and see how I have kept them in place until they are fixed with an elastic band











]




Thanks Dan great well done
Chas

Well done Chas, thanks for the photos I'll look at the other clip sometime this week

Ok thanks
Chas

Hi here are some of my indicators that I need to repair With Dans new posts thanks Chas

You seem to have a lot of indicators that need
Repairing

Yes but I have 10 boxed sets and another 8 sets needing no repair without boxes
non for sale

Hi Chas,

with your collection of C5s and accessories you must be worth a minor fortune.

Have to have think of paying you a midnight visit.

And here are a few that I have repaired with Dans new posts










This is not the complete I have more to do when Dans makes the other post (the one that the wires go through)

Chas \:d/ \:d/ :-({|= :-s :-({|=

That's great, well done Chas. I think one day you'll have to stack all your accessories in a pile and post a photo for the rest of us to drool over

Thanks Dan I may do one day
Bye Chas \:d/ \:d/ :-({|= \:d/ \:d/
Ps did you see the photo of the second indicator post I sent you

That's a shame chas

Hi all here are Dans 3D printed indicator posts (the small ones that the wires go through) They are great and fit great well done again Dan
The one in the middle in the top photo is the original

The sec photo the one on the left is the original as you will see they all look great